The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Hitec X1 Pro/ePowerbox Combo

Log in for pricing

Write a Review
Hitec X1 Pro/ePowerbox Combo
This is the Hitec X1 Pro DC Powered Battery Charger and Balancer
and the ePowerbox 17 Amp Power Supply.
X1 Pro DC Powered Battery Charger;
Charges 1-6 cell LiPo, LiFe & LiIon batteries
1-15 cell NiMH NiCd batteries
2-20V lead acid (Pb) cells
180W charging circuit
Adjustable charge current rate of 0.1-16 amps
Fast and storage charge modes for lithium batteries
Balances individual cells during discharging
Re-peak mode and delta peak sensitivity for NiMH and NiCd batteries
Hitec Charge Master software allows control of charger through a
Blue LCD backlight display
Docking capability with the Hitec ePowerBox 17A power supply
Single port output
ePowerbox 17 Amp Power Supply;
Converts 100-240 AC volts into 17 amps of continuous 13.8V DC power
for compatibility with a wide variety of DC chargers
5V/2.1A USB output
Temperature controlled cooling fan
One year limited warranty on both components through Hitec
beginning at date of purchase when purchased and used in the USA,
Canada or Mexico
Hitec X1 Pro DC Powered Battery Charger, 2-6S Balance Board, Balance
Adapter, 12AWG DC Input Power Cable with XT60 Plug, 18AWG Wire
Charging Cable, 2S Hardcase LiPo Charging Lead,
ePowerbox 17 Amp Power Supply with AC Power Cord, 18AWG Wire Lead
with XT60 Plug, four Male Output Plugs and Instruction Manuals
Battery Charger;
Input Voltage Range: 11-18V DC
Charge Circuit Power: 180 watts
Discharge Circuit Power: 30 watts
Charge Current Range: 0.1-16 amps
Discharge Current Range: 0.1-8.0 amps
LiPo, LiFe & LiIon Balancing Current Drain: 200mA per cell
LiPo, LiFe & LiIon Cell Count: 1-6 cell
Maximum NiCd/NiMh Cell Count: 1-15 cells
Lead Acid (Pb) Cells / Voltage: 2-20 V
Dimensions: 3.6 x 4.4 x 2.0" (91 x 112 x 51mm)
Weight: 14.3oz (405g)
Power Supply;
Input Voltage Range: 100-240V AC
AC Input Voltage Frequency: 50-60Hz
Output Voltage: 13.8V DC +-0.2V
Current Overload Protection: 17.5A 500ms
Input Current Protection: 5A fuse
USB Output Voltage/Current: 5V /2.1A
Power Efficiency: 91%
Power Factor: >0.98
Temperature Protection Circuit: 149?F (65?C)
Operating Temperature Range: 32-104?F (0-40?C)
Dimensions: 5.0 x 3.6 x 2.0" (127 x 91 x 51mm)
Weight: 21oz (595g)